Page 1
Industrial panel pc User manual The model you choose: □ DIAVH-PPC153100 □ DIAVH-PPC155100 □ DIAVH-PPC153101 □ DIAVH-PPC155101 □ DIAVH-PPC153102 □ DIAVH-PPC155102 □ DIAVH-PPC153103 □ DIAVH-PPC155103 □ DIAVH-PPC153104 □ DIAVH-PPC155104 □ DIAVH-PPC153105 □ DIAVH-PPC155105 version:Ver. A02...
Page 2
Disclaimer This manual is only for Delta Electronics, Inc, no copyright without permission .the contents of this manual are not representative of the manufacture’s commitment ,due to the continuous improvement of products, we reserve the right to change the manual, please forgive that if no information in advance.
Page 3
Safety Instructions • Please read the user manual carefully before using the product, and carefully keep it for future reference. • Before connecting power supply to the product, please confirm the voltage is compliant with the requirement of the device. •...
Page 4
Packing List • A fanless industrial Computer • 1*AC 100V~240V to DC+12V/5A power adapter • 1*AC220V power cable • 2*Mounting Bracket & 6*Screw • 1*Driver CD & manual • 1*Certification,1*packing list...
2.Application planning 2.1 Transportation Well-packaged products are suited for transportation by truck, ship, and plane. During transportation, products should not be put in open cabin or carriage. During transshipping, products should not be stored in open air without protection from the atmospheric conditions. Products should not be transported together with inflammable, explosive and corrosive substances and are not allowed to be exposed to rain, snow and liquid substances and mechanical force.
Page 11
● When you check the delivered equipment, please check whether it is obviously damaged during the transportation. ● Please check whether the delivered parcel includes the whole equipment and the accessories you ordered separately. If there is any discrepancy or damaged during transportation, please contact our customer-service staff.
4. Interface definition 4.1 USB There are 4 USB 3.0 on this product, following is the pin definition: Definition D+ D- VBUS StdA_SSTX+ StdA_SSTX- USB1~4 GND_DRAIN StdA_SSRX+ StdA_SSRX- 4.2 Ethernet There are 2 Ethernet 1000M on this product,following is the pin definition: LAN1,LAN2 LILED netstat...
4.5 Standard HDMI A Type definition definition DATA2+ DATA2 shield DATA2- DATA1+ DATA1 shield DATA1- DATA0+ DATA0 shield DATA0- DATA1_CK+ DATA1_CK DATA1_CK- HDMI Reserved shield SCL(DDC SDA(DDC data) DCC/CEC GND clock) Hot swap test 4.6 Power This product support DC+12 V power in, together with power adapter, and following is the power pin definition: definition +12V...
5. Appendix 5.1 Host BIOS settings 5.1.1 Main Press F2 to boot, go into BIOS →CMOS, setting date and time as shown in picture 5-1: Picture 5-1 5.1.2 CSTIPC Enter page of picture5-2, choose “LCD setting” to page of picture5-3 Picture 5-2 - 11 -...
Page 18
Picture 5-3 In “LCD Panel Type” options, you can change panel pc’ s original resolution, if the resolution you choose is uncompatible with screen’ s real resolution, may lead to unnormal showing. In page of picture 5-4, choose ”AC power Loss Setting” to enter “Restore AC Power Loss”...
5.1.4 Chipset Here you can set I/O port,system memory,graphics memory,as shown in picture 5-7: Picture 5-7 5.1.5 Boot The menu can set Num Lock’ s status when booting, or set storage’ s boot program, firstly, choose first boot device in “Hard Drive BBS Priorities”,, then choose it in “Boot Option #1”,press F4 to save and exit.
Enter “Hard Drive BBS Priorities”, choose first boot device in “Boot Option #1”,as shown in 5-9: Picture 5-9 After last step, press “ESC” to return to last page,choose first boot decvice in “Boot Option #1”again,as shown in picture 5-10,preess “F4” to save, press “enter”...
5.2 Driver software installation 5.2.1 Chipset driver installation (1) Enter “Driver \Chipset\”, double click “Intel _inf.exe” . ( 2 ) F o l l o w n o ti c e , c l i c k “ n e x t s te p ” a n d “ c o n ti n u e ” . (3) After installation, choose “Yes”...
5.3 Touch screen adjustment 5.3.1 touch screen four points calibration Click to enter “eGalaxTouch”(picture 5-13),choose “tools”(picture 5-14),click”4 points calibration”(picture5-15),follow prompt box to click four corner fo touch screen(picture5-16),then “confirm” to finish calibration.(picture 5-17) Picture 5-13 Picture 5-14 Picture 5-15 - 18 -...
Page 25
Picture 5-16 single-click:lightly click screen for one time double click:quickly click screen for twice right key:lightly click screen and wait for 1 second - 19 -...
5.4 Trouble & Trouble shooting Common Possible Reasons Trouble shooting and solution Malfunction Please check the power supply and the power No power supply cable/connector The device is Improper device 1. Check the environment conditions not operating operating 2. Please wait for 12 hours before powering on environment the device shipped in cold day.
Page 27
Common Possible Reasons Trouble shooting and solution Malfunction In booting priority of the BIOS setting, Modify the booting priority of the device in the Boot device the device is not the Boot menu of BIOS setting or include that device not found first priority or the into the booting priority...