Page 2
• Connect the spiral hose with the metal connector (A) to the fitting on the compressor (B) • Push the open end of the 6 mm hose (C) into the air supply connection of the ProValve (marked 1 on the pilot valve). Fittings are provided with the ProValve.
Page 3
• Sluit de spiraalvormige slang met metalen connector ( A ) de montage van de compressor ( B ) • Schuif het open uiteinde van de 6 mm slang ( C ) in de luchttoevoeraansluiting van de ProValve ( aangegeven 1 van de stuurklep ) . De fittings zijn met de proValve meegeleverd.
Page 4
• Conecte la manguera con el conector de metal ( A) en el adaptador del compresor ( B ). • Empuje el extremo abierto del tubo (C ) en la conexión de suministro de aire de la ProValve (marcado 1 en la válvula piloto) . Las conexiones se suministran con la ProValve .