System BIOS Settings (cont.)
RAID Function Support (on selected model)
For models support RAID function, you must set the RAID item in the BIOS Setup before you can
create a RAID set from the built-in hard disk drives.
WARNING! Building a RAID set will clear all your data on both the primary disk
drive and the secondary disk drive. Ensure that you've made a backup before creat-
ing a RAID set.
The recovery partition will be deleted after you create a RAID set. You can only
install the system OS with the recovery DVD or a retail OS disc.
Only models with two disk drives may support this RAID function.
To enable the RAID function
1. Press <F2> to enter the BIOS Setup during POST.
2� GototheAdvanced menu.
To build a RAID set
1. Restart the system and press <ESC> on bootup.
2. Press <Ctrl> + <I> to start the RAID utitliy.
3. Select a desired RAID set to create.
4. Restart the system and reinstall the system OS.
3� SetSATA Operation Mode to [RAID].
4. Press <F10> to save the configuration and exit the
BIOS setup.
Intel(R) Matrix Storage Manager option ROM v7.0.0.1020 ICH8M-E
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model
Serial #
0
Hitachi HTS72202
02DP0410DTG564WP
1
Hitachi HTS72202
02DP1400DEG1XRGN
Press <Ctrl-I> or Enter to Configuration Utility..
Intel(R) Matrix Storage Manager option ROM v7.0.0.1020 ICH8M-E
Copyright(C) 2003-07 Intel Corporation. All Rights Reserved.
[
MAIN MENU
1. Create RAID Volume
2. Delete RAID Volume
5. Exit
[
DISK/VOLUME INFORMATION
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model
Serial #
0
Hitachi HTS72202
02DP0410DTG564WP
1
Hitachi HTS72202
02DP1400DEG1XRGN
[↑↓]-Select
[ESC]-Exit
A
Appendix
Size
Type/Status(Vol ID)
186.3GB
Non-RAID Disk
186.3GB
Non-RAID Disk
]
3. Reset Disks to Non-RAID
4. Recovery Volume Options
]
Size
Type/Status(Vol ID)
186.3GB
Non-RAID Disk
186.3GB
Non-RAID Disk
[ENTER]-Select Menu
A-9