LG F171P1CY2W Owner's Manual page 120

global_main.book.book Page 30 Friday, September 25, 2020 3:39 PM
OPERATION
30
5
Open the door after it unlocks itself and add or
remove necessary clothing items.
6
Close the door and press the Start/Pause
(Start/Pause) button.
NOTE
• For safety reasons, the door remains locked
when the water level or temperature inside of
the drum is high. It is not possible to add clothes
at this time.
Odložený start (Delay Wash)
You can set this function so that the appliance
starts automatically and finishes after a specified
time interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Odložený start (Delay Wash) button
as necessary.
4
Press the Start/Pause (Start/Pause) button.
NOTE
• Except for LED of the Odložený start (Delay
End) button, all LEDs on the control panel will be
turned off within 20 minutes. This feature may
vary depending on the model purchased.
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, clothes
and other factors.
• To cancel the function, the Power button should
be pressed.
• Avoid using liquid detergent for this function.
Settings
Dětská pojistka (Child Lock)
Use this option to disable the controls. This
function can prevent children from changing cycles
or operating the appliance.
NOTE
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked,
remaining time are alternatively shown on the
display during the wash while this function is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Praní (Wash) and Máchání
(Rinse) buttons at the same time for 3 seconds
to activate this function.
• A beeper will sound, and
the display.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Praní (Wash) and Máchání
(Rinse) buttons at the same time for 3 seconds
to deactivate this function.
Zvuk (Beep On/Off)
This appliance plays a melody when it starts and
stops.
• Press and hold the Zvuk (Beep On/Off) buttons
simultaneously for 3 seconds to deactivate/
activate this function.
and the
[L
will appear on
CL