Sony PCG-Z1AP2 VAIO User Manual page 57

Connecting a printer
You can easily connect a printer to your computer or port replicator (if applicable). If you wish to purchase a port replicator,
shop Sony online at http://www.sonystyle.com/vaio
The New Hardware Wizard enables you to easily install the printer software, but some printers require separate driver
software installation. See the instructions that accompanied your printer for more information.
To connect a USB printer
1.
Plug the USB cable into the USB port
chapter of your printed VAIO
2.
Plug the other end of the USB cable into the USB port on the printer. The Found New Hardware Wizard
appears.
Connecting a USB Printer
See the guide that accompanied the printer for more information on its installation and use.
To connect a printer (port replicators only)
1.
Connect the computer to a port replicator (not supplied). See
2.
Plug the printer cable into the Printer port
and Jacks.
3. Plug the other end of the printer cable into the port on the printer.
Connecting a Printer
or contact your local retailer.
on your computer. See "Locating Controls and Ports" in the "Setting Up"
Computer Quick Start.
®
on the port replicator. For more information, see
Connecting a Port Replicator for more information.
Locating Ports
Page 57