Basic Sequence Of Operations - Canon Cine-Servo Manual

Introduction

Basic Sequence of Operations

1
Turn on the lens.
2
Press the Display switch.
DISPLAY
IG: 50
MENU
[Adj]
Fr1P
A
[Trk]OFF
Shtl
A 1
Fr1P [I-Tq]H
A 2
The display is now illuminated.
3
Use the control keys to complete settings.
DISPLAY
MENU
IG: 50
[Adj]
Fr1P
A
[Trk]ON
Shtl
A 1
Fr1P
A 2 [I-Tq]H
Changes are saved.
4
Press the Display switch.
DISPLAY
The display is turned off.
For Reference: Display appearance when restoring original settings
Basic Mode
B
User
ResetAll
User: y/n
Note:
Note:
Note:
Important
Full Mode
1
User
ResetAll
User: y/n
AllUser: y/n
E14
For instructions on turning the lens on, refer
to the camera manual.
The display turns off automatically after two
minutes if no control keys are pressed. (Auto
Off.) However, the display remains active as
long as the Fol. screen is shown. In this case,
it is only deactivated when you press the Dis-
play switch.
Any changes to settings are saved even if the
display is automatically deactivated, just as
they are when it is switched off manually.
When the display is deactivated manually,
changes to settings are saved and the display
is turned off.
However, if the lens is turned off while the
display is on, changes to settings may not be
saved.
Restoring the Original
Settings
The original settings can be restored, in
the case of incorrect settings or if you have
tried some settings tentatively.
For details, see "Resetting Values"
in "3. Operation in Basic Mode" or
"4. Operation in Full Mode."