12 Disassembly of the parts
12.1. Indoor Electronic Controller
1.Pull the intake grille outward and loosen the fixing screws.
(Fig 1)
2.Remove the supporting tool .( Fig 2)
Supporting tool
3.Loosen the screws on the control board cover
(Note:When loosening the screws, be careful not let the
cover drop.) ( Fig3)
(Fig 4)
Fig 1
Fig 2
Fig 3
Fig 4
12.2 Indoor Flow Fan and Fan
Motor Removal Procedure
1.In order to remove the flow fan and the fan motor, the
intake grille should be removed first( refer to the previous
procedure). Release the sensor of inlet air.(Fig 5)
2.Turn the fixing tool of the intake air duct clockwise to pull
it out.
3.Loosen the fixing nut of the airflow fan and take out the
airflow fan.(Fig 7)
4. Loosen the fixing screws of the fan motor to remove the
fan motor.(Fig 8)
37
CS-C45FFH / CU-C45FFH
Fig 5
Fig 6
Fig 7
Fig 8