Hoover uh74200 User Manual page 13

Maintenance
Cleaning & Maintaining the Brush Roll
CAUTION
To reduce the risk of injury from moving parts, unplug before servicing.
LUBRICATION: The motor and brush roll
are equipped with bearings which contain
sufficient lubrication for their lifetime. The
addition of lubrication could cause damage. Do
not add lubricant to motor or brush roll.
TIP: Rotate brush roll manually to ensure the belt is properly installed. Vacuum is equipped with an automatic brush roll shutoff in the event of overload or jam. Check for obstructions
in the brush roll area and remove any obstructions. When obstructions are cleared, resume cleaning as normal.
To access the brush roll, unscrew the
nozzle guard from the nozzle.
1
Remove any hair or blockages.
3
Remove the brush roll by pulling
it up and out from the vacuum belt.
2
Replace brush roll and nozzle guard.
Secure with screws.
4
13