Table of Contents
Advertisement
ENGINE SWITCH AND OIL WARNING UNIT
1 Oil warning light
2 Wire harness protector
3 Oil warning unit lead (ground)
4 Oil warning unit
5 Clamp
6 TCI unit lead
7 Oil warning unit lead
8 Oil level switch lead
9 Engine switch
A Pass through the leads to the
wire harness protector, and
then push into the oil warning
unit towards back.
WIRE ROUTING DIAGRAM
B Make sure that the gap
between the end of the wire
harness protector and end of
the fuel tank stay is 5 mm (0.2
in) or more.
C Fasten the ground terminal
and oil warning unit together.
D Pass the TCI unit lead through
hole in the crankcase.
E Fasten the connecter area
using the clamp.
4-13
SPEC
Color code
B .........Black
Gy .......Gray
L..........Blue
R .........Red
Y .........Yellow
W/B .....White/Black
Advertisement
Table of Contents
