Related Manuals for D-Link DAP-3712
Summary of Contents for D-Link DAP-3712
- Page 1 Quick Installation Guide 20 km Long Range 802.11ac Wireless Bridge DAP-3712 Additional documentation is also available on the D-Link website...
- Page 2 Contents English...
-
Page 3: Before You Begin
Before You Begin Hardware Overview This installation guide provides basic instructions LED Indicators for installing the DAP-3712 on your network. The device should be ensured that systems employing high gain directional antennas are used exclusively for fixed, point-to-point operations. For additional information about how to use the access point, please see the User Manual from the D-Link support website. -
Page 4: Hardware Installation
Figure 5: Connecting the Ethernet Cable Connect the adjustment kit to the base of Figure 3: Assembling the Dish the DAP-3712 by pressing it in until it clicks and locks in place. Use the adjustment Connect the antenna and base through kit to position the antenna at the desired the hole in the center of the dish. -
Page 5: Cable Requirements
Computer Figure 8: Indirect Connection Mounting the Device Installation Recommendations If you plan to install the DAP-3712 on a pole, orient the front of the device (the dish and antenna) toward the intended coverage area. DAP-3712 The antenna only transmits data in the direction it is pointed. - Page 6 Figure 9: Mounting the Device Thread the metal mounting tie through the hole on the base of the DAP-3712 and and wrap it around the pole. Fasten the tie to secure the device against the pole. TECHNICAL SUPPORT dlink.com/support...
- Page 7 Appendix - Statements FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
- Page 8 Ver. 1.00(WW)_130x183 2020/07/24...