Installation; Right Place For Installation; Adjusting The Stands - Grundig GQN1112X User Manual

3. Installation

3.1 Right place for installation

Contact the Authorized Service for
the product's installation. To ready
the product for installation, see the
information in the user guide and
make sure the electric and water
utilities are as required. If not,
call an electrician and plumber to
arrange the utilities as necessary.
B
B
A
3.2 Attaching the
plastic wedges
Use the plastic wedges in the
provided with the product to
provide sufficient space for air
circulation between the product
and the wall.
10
WARNING:
The
manufacturer assumes
no responsibility for
any damage caused by
the work carried out by
unauthorized persons.
WARNING:
The
product's power cable
must be unplugged
during installation.
Failure to do so may
result in death or
serious injuries!
WARNING:
If the door
span is too narrow
for the product to
pass, remove the door
and turn the product
sideways; if this does
not work, contact the
authorized service.
1.
To attach the wedges, remove
the screws on the product and
use the screws provided with
the wedges.
2.
Attach 2 plastic wedges on the
ventilation cover shown as j in
the figure.

3.3 Adjusting the stands

If the product is not in balanced
position, adjust the front adjustable
stands by rotating right or left.