Table of Contents
Advertisement
To interrupt washing operation, press the "ON/OFF" button on the operation panel. The
display and lamps go off, and the unit stops.
To resume operation, press the "ON/OFF" button.
11. STANDBY/CLEANING BUTTON
To keep wash water hot while the dishwasher is left idle, press the "STANDBY/CLEANING"
button and close the door. Wash water will cool more quickly if the door is left open.
1) Press the "STANDBY/CLEANING" button on the operation panel. The standby lamp
lights up ("READY" lamp goes off). The unit will not start even when the door is opened
or closed.
2) To resume operation, press the "STANDBY/CLEANING" button on the operation panel.
The "READY" lamp lights up (standby lamp goes off). Now the dishwasher is ready to
wash.
The "STANDBY/CLEANING" button function is not available during washing
operation. Press it while the "READY" lamp is on.
12. INTERNAL BOOSTER TANK ENERGY SAVING CONTROL
When the dishwasher is left idle for a while, the internal booster tank water temperature
can be temporarily set lower to save energy. For further details, consult with an authorized
Hoshizaki service company.
13. ALERT FUNCTION
To keep water in the wash tank clean, this unit is provided with functions to beep and flash
"Ch" (= Change) in the display when wash water should be changed and to continue this
alert until the wash water tank is refilled (factory default: OFF). For further details, consult
with an authorized Hoshizaki service company.
14. LOW TEMPERATURE LOCK FUNCTION
Continuous washing operation may lower the wash and rinse water temperatures, resulting
in poor washing performance. To prevent performance reduction, the unit can be set to lock
the wash and rinse cycles at low temperatures (factory default: OFF). For further details,
consult with an authorized Hoshizaki service company.
IMPORTANT
14
Advertisement
Table of Contents
