Away Comfort Profile Fresh Air Control - Bryant Evolution Connex SYSTXBBWEC01-B Owner's Manual

– Use the Up (Y) and Down (B) buttons to set the minimum
humidity level between 5%-45%.
– Press SAVE when finished, or CANCEL to discard any changes.
• To set the desired humidity level during cooling, touch COOLING
HUMIDITY.
– Use the Up (Y) and Down (B) buttons to set the maximum
dehumidification level at NONE or between 55-65%.
– Touch YES or NO for the system to over-cool the conditioned
space by up to 3°F to remove as much humidity out of the air as
possible.
– Press SAVE when finished, or CANCEL to discard any changes.

5.5. Away Comfort Profile Fresh Air Control

You may wish to have different Fresh Air profiles for when you're away.
Press the menu area on the Main Screen to access the additional menu
selections. Select Comfort Profiles, then select Humidity and Fresh
Air Profiles option.
• Touch AWAY to set your fresh air settings while you are away from
home.
• If a ventilator is installed in your home, select the amount of fresh air
to circulate during heating mode by touching HEATING FRESH
AIR.
NOTE: This option may not be available with the ERVXXNVA
ventilator due to its simplified Control design.
– You will have the option of choosing between AUTO, MANUAL,
or OFF.
– The AUTO setting will allow the system to choose the fresh air
setting in a range of Low, Medium or High, as selected by you.
– The MANUAL setting allows you to select the percentage of fresh
air to supply to your home. In the MANUAL mode, there are
26