Setup Security Menu; Setup Hdmi Link Settings Menu; Setup Test Pattern Menu - NEC M380HL User Manual

USING THE PROJECTOR
USB Power (Standby)
Enable or disable the USB power function when the projector is in standby mode.

Setup security menu

Security
Enable this function to prompt for a password before using the projector.
‡ On: Choose "On" to use security verification when the turning on the projector.
‡ Off: Choose "Off" to be able to switch on the projector without password verification.
Security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
Change Password
Use to set or modify the password that is prompted when turning the projector on.
Note: Password default value is "1234" (first time).

Setup HDMI link settings menu

Note: When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them
on the same power on or power off status using the HDMI Link control feature in the projector's OSD. This
lets one device or multiple devices in a group power on or power off via HDMI Link Feature in a typical
configuration, your DVD player may be connected to the projector through an amplifier or home theater
system.
HDMI CEC
Default is Off. Select "On" to enable HDMI CEC function.

Setup test pattern menu

Test Pattern
Select the test pattern from green grid, magenta grid, white grid, white or disable this function (off).
38 English
HDMI
Amplifier
HDMI
DVD Player