Dell EMC VEP4600 Installation Manual page 26
Hide thumbs
Also See for EMC VEP4600:
- Installation manual (85 pages) ,
- Operating system installation manual (78 pages) ,
- Setup manual (23 pages)
Table of Contents
Advertisement
Figure 18. Molex terminal block
7. Tighten the screws with a number 1 Philips screwdriver on the terminal block to secure the number 10 to number 3 AWG
wires.
Figure 19. Tighten wires to terminal block
8. Mate the terminal block to the connector on DC PSU. Place the VEP4600 System Label from the kit on top of the DC PSU
cover.
26
Power supplies
Advertisement
Table of Contents
