Connecting The Speaker To Your Home Network; Simple Connection (Ez Setup) - LG Music Flow SJ6B Owner's Manual

Connecting the speaker
to your Home Network
Using a wired network provides the best
performance, because the attached devices connect
directly to the network without radio frequency
interference.
Please refer to the documentation for your network
device for further instructions.
Preparation
y Make sure that wireless network environment
using a router is installed at your home.
y Make sure that the speaker and the smart device
are connected to the same router.
Requirements
y Wireless router
y Smart device (Android or iOS)
,
Note
y Make sure that DHCP' s server is activated on
wireless router.
y If you cannot connect the speaker with your
router, go to setting of the router and then
make sure that "Allow wireless client to see
each other and access my local network" box
is unchecked.

Simple Connection (EZ Setup)

Preparation
y For Simple Connection, Wi-Fi network condition is
needed.
y Make sure that the Bluetooth setting on your
smart device in on.
y Select WI-FI function by using F on the remote
control or F on the sound bar.
,
Note
y Simple Connection is supported by Bluetooth
Ver 4.0 (or higher).
y If Simple Connection screen is not displayed on
the screen, refer to "Connecting the speaker
to your Home Network" on page 21.
1. Plug in the desired device, and tap [Next].
2. App searches for the speaker and connects it
automatically, Tap [Next].
or
3. If the network password is set, security screen is
displayed. Type the password.
Connecting 21
2