Sony PCG-FRV26 VAIO User Guide (primary manual) User Manual page 50

Connecting a printer
You can connect a universal serial bus (USB) printer or, depending on the model, a parallel port printer to your computer.
The New Hardware Wizard enables you to easily install the printer software, but some printers require separate driver
software installation. See the instructions that accompanied your printer for more information.
To connect a USB printer
1. Plug the USB cable into the USB port
chapter of your printed VAIO
2.
Plug the other end of the USB cable into the USB port on the printer. If the New Hardware Wizard appears,
follow the on-screen instructions to finish setting up the printer.
Connecting a USB Printer
See the guide that accompanied the printer for more information on its installation and use.
To connect a parallel printer
1. Plug the printer cable into the Printer port
"Setting Up" chapter of your printed VAIO
2. Plug the other end of the printer cable into the port on the printer. If the New Hardware Wizard appears, follow
the on-screen instructions.
Connecting a Parallel Port Printer
on your computer. See "Locating Controls and Ports" in the "Setting Up"
Computer Quick Start.
®
on your computer. See "Locating Controls and Ports" in the
Computer Quick Start.
®
Page 50