Advertisement
Quick Links
Grading Scrapers
GS2572, GS2584 & GS2596
26654
Table of Contents
Pictured with optional Scarifier Shanks
!
Operator's Manual
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
303-268M
Printed 9/25/18
Advertisement
Related Manuals for Land Pride GS2572
Summary of Contents for Land Pride GS2572
- Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 9/25/18...
- Page 2 Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov GS2572, GS2584 & GS2596 Grading Scrapers 303-268M 9/25/18...
- Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
- Page 4 Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. detailed instructions. GS2572, GS2584 & GS2596 Grading Scrapers 303-268M 9/25/18...
- Page 5 Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
- Page 6 Lower implement to the ground and Replace parts on this implement implement. follow all shutdown procedures with genuine Land Pride parts only. Attach the chain to the tractor before leaving the operator’s seat to Do not alter this implement in a way drawbar support or other specified perform maintenance.
- Page 7 Use Seat Belt and ROPS signals are recommended Keep Riders Off whenever driving on public roads. Machinery Land Pride recommends the use of a CAB or roll-over-protective- Never carry riders on tractor or structures (ROPS) and seat belt implement.
- Page 8 Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
- Page 9 Table of Contents Introduction Introduction Land Pride welcomes you to the growing family of new Terminology product owners. This Grading Scraper has been “Right” or “Left” as used in this manual is determined by designed with care and built by skilled workers using facing the direction the machine will operate while in use quality materials.
- Page 10 Land Pride Service Department 1525 East North Street P.O. Box 5060 Salina, Ks. 67402-5060 E-mail address lpservicedept@landpride.com Position hitch straps with large holes “A” towards the front. 26655 Hitch and Shank Set-up Figure 1-1 GS2572, GS2584 & GS2596 Grading Scrapers 303-268M 9/25/18...
- Page 11 (#1 & #2) until loose and then tighten all six hex nuts (#8) to the correct torque. 8. Install 3/4" x 3 3/4" hitch pin (#12) to hitch straps and secure in place with hairpin cotter (#13). 9/25/18 GS2572, GS2584 & GS2596 Grading Scrapers 303-268M...
- Page 12 3-point hitch about 1" to 2" to align the center link with the center hitch pin hole. NOTE: Land Pride’s Quick Hitch can be attached to the tractor to provide quick and easy 3-point hook- 5. Connect top center link (#6) to upper pivot hitch using up and detachment.
- Page 13 Tighten 5/8"-11 GR5 bolts (#3) to the correct torque. cutting depth under each skid shoe (#1). Do not use shims if cutting depth is 0 inches. 8. Make all grading passes with middle-of-roadway on the left-hand side of the scraper. 9/25/18 GS2572, GS2584 & GS2596 Grading Scrapers 303-268M...
- Page 14 Table of Contents Section 2: Adjustments Shank Height Adjustment NOTE: (GS2572 & GS2596 Only) Refer to “Top Hole” illustration below: Two of the bent pins (#2) WARNING supplied with model GS2596 only are 1" longer than To avoid serious injury or death: the others.
- Page 15 Do not use implement to tow other equipment unless it is • designed with a tow hitch. Doing so can result in loss of control and damage the equipment. 9/25/18 GS2572, GS2584 & GS2596 Grading Scrapers 303-268M...
- Page 16 3-point hitch. Whether you have chosen our hardware, missing parts, broken parts, structural cracks, GS2572, GS2584 or GS2596, the working or grading and excessive wear. Make repairs before putting implement principals are the same. Your two grading blades should back into service.
- Page 17 Rear Mounted Cutting Blades Refer to Figure 4-1: Refer to Figure 4-2: Land pride offers an option for adding scarifier shanks to An additional set of cutter blades (#1) with mounting your Grading Scraper for breaking up soil ahead of the hardware (#2 &...
- Page 18 Always keep your body extremities out from under the shanks and cutting blades while removing, installing, and adjusting them. It is possible for the cutting blades and/or shanks to fall causing injury to your body. GS2572, GS2584 & GS2596 Grading Scrapers 303-268M 9/25/18...
- Page 19 4. Store scraper on a level surface in a clean, dry place. Order only genuine Land Pride parts from your local Land Inside storage will reduce maintenance and make for Pride dealer when replacing skid shoe components.
- Page 20 Land Pride Beige or Orange 34 9/16" (87.8 cm) 56 1/2" (1.44 m) GS2572 = 78 1/4" (1.99 m) GS2584 = 90 1/4" (2.29 m) GS2596 = 102 1/4" (2.60 m) 26667 GS2572, GS2584 & GS2596 Grading Scrapers 303-268M 9/25/18...
- Page 21 Reversible skid shoes Extends the life of the skid shoes. Heavy duty frame construction. Assures long lasting reliability and performance. Available in Land Pride Beige or Orange Paint. To meet customers preference. 9/25/18 GS2572, GS2584 & GS2596 Grading Scrapers 303-268M...
- Page 22 = nominal thread diameter in millimeters x thread pitch 1-1/2" - 12 1330 2970 2190 4820 3560 Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. GS2572, GS2584 & GS2596 Grading Scrapers 303-268M 9/25/18...
- Page 23 This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.
- Page 24 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...