Table of Contents
Advertisement
76
Parameter
Silent Boot
Num Lock
After Boot
Memory Test
Release All
Blocked
Memory
Boot from
LANDesk (R)
Service Agent
Description
Enables or disables the Silent Boot
function. When set to Enabled, BIOS is in
graphical mode and displays only an
identification logo during POST and while
booting. After booting the screen displays
the operating system prompt (such as DOS)
or logo (such as Windows 95). If any error
occurs while booting, the system
automatically switches to the text mode.
Even if your setting is Enabled, you may
also switch to the text mode while booting
by pressing the Delete key when you see
the "Press DELETE key to enter setup"
message on the screen.
When set to Disabled, BIOS is in the
conventional text mode where you see the
system initialization details on the screen
Allows you to activate the Num Lock
function upon booting
When set to Enabled, this parameter
allows the system to perform a RAM test
during the POST routine. When set to
Disabled, the system detects only the
memory size and bypasses the test routine.
When set to Enabled, this parameter
allows the system to bypass testing the
defective memory banks detected earlier
When enabled, it intervenes in the
LAnDesk Service Agent boot process.
4 BIOS Setup utility
Option
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Disabled
Enabled
Disabled
Enabled
Advertisement
Table of Contents
