Acer PD525 User Manual page 27

Acer
change the default start-up screen of Acer
projector to their desired image. You can install
My Start-up Screen from the bundled CD.
Connect the projector to your PC with the
bundled USB cable then execute My Start-up
Screen utility to download your desired image
from your PC to projector. Before the download
starts, the projector must enter "Download
Mode" first. Please follow the instruction below to
enter "Download Mode".
1. If the AC power cord of the projector was unplugged, plug the
AC power.
2. If the projector was turned on, press power button twice to turn
off the projector.
3. Make sure all the fan of projector was shut down and the "Power"
LED is blinking.
4. Press and hold "Menu/Enter" button then press " " button.
5. When "Temp" and "Lamp" LEDs turn on again, release both
buttons, projector enters download mode.
6. Please make sure the USB cable has been plugged and connected
to your projector.
Reset
Press the button after choosing "Yes" to return the display
parameters on all menus to the factory default settings.
User Controls
Management
(Computer / Video
Mode)
My Start Screen
My Start-up Screen is a PC utility for user to
... English
27