Acer PD311 Service Manual page 24

No Step
6 Check
the whole
process
Chapter2
Procedure
1. In the "Read Item"
Selections, choose
the Port that you use.
Ex: If you use the
Analog Port, choose
"Analog" in the "Read
Item".
2. Click on "Read" to
read EDID
information.
3. The "EDID
Informations" will
show the result.
(Note: After press-
ing "Read", if the code
in the Serial Blank is
scrambled, please make
a check in "Trans".)
4. Click "Reset" to do the
next unit or "Exit" to
close the EDID
program.
3
Note
Photo
2
4
1
18