Table of Contents
Advertisement
3. Disassembly and Assembly
This section describes the disassembly and reassembly sequences for this monitor.
Warning:
As this monitor has parts that are sensitive to static electricity, be careful when handling them.
3-1. Disassembly
Caution:
1. Turn the monitor off before beginning the disassembly process.
2. When disassembling the monitor, do not use any metal tools except for the provided jig.
3. Disassemble the monitor carefully as directed in the following procedures.
4. When assembling and disassembling the monitor, the gasket attached to the PCB may be detached
from the PCB. Therefore, make sure to check whether it is attached to the PCB correctly. If it is detached
from the PCB, make sure to reattach it.
Description
1. Place a soft cloth on the floor and place the
monitor on it so that the front of the monitor is on
the cloth.
Caution: If you do not tilt the stand and use too
much force to remove it, the connection
pin may break.
2. Hold one edge of the FRONT-COVER and push
it downwards to separate it.
All manuals and user guides at all-guides.com
3. Disassembly and Assembly
Photo
Screws
3-1
Advertisement
Table of Contents
