LCD Module Disassembly Process
IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and
replacement of components, ensure all available cable channels and clips are used and that the cables are
replaced in the same position.
NOTE: These disassembly procedures feature the 3G model only, therefore there are four antenna cables (white,
black, yellow, and blue) addressed during the procedure. If 3G is not supported, only the WLAN antennas (white
and black) need to be removed.
LCD Module Disassembly Flowchart
Screw List
Step
LCD Bezel
LCD Panel
LCD Brackets
Chapter 3
Remove
Microphone
Board
Remove
Remove
LCD FPC Cable
LCD Brackets
Screw
M2*5
6
M2*3
2
M2*3
4
Remove LCD
Panel from Main
Unit before
proceeding
Remove
LCD Bezel
Remove
Remove
LCD Panel
Camera Module
Remove
WLAN Antennas
Quantity
86.S0207.002
Remove
3G Antennas
Part No.
89