Environmental; Power Requirements; Controller - Quinton MedTrack CR60 User Manual

Power Requirements

B-2 Specifications

Environmental

Temperature
Humidity (non-
condensing)
Listed below are the power requirements for your treadmill
Nominal Voltage Range
(min - max) / Hertz*
100-120 V, 50/60 Hz
200-240 V, 50/60 Hz
* The nominal voltage range is listed on the serial number name plate, which can
be found on the hood under the circuit breaker switch.
** Full-load current is computed as described in section 430-24 of the National
Electrical Code.

Controller

Speed 3-digit display
Units Miles per hour (mph) or
kilometers per hour (km/h)
Range 0 to 7.2 mph (0 to 11.6 km/h)
or 0 to 12 mph (0 to 19.3 km/h)
Increment 0.1 mph
Accuracy Within +0.2 mph (0.3 km/h) of actual speed
during unchanging operation, 1 mph (1.6 km/h)
during speed decrease. Shows target, not
actual, speed during speed changes.
Grade 3-digit display
Units Percent
Range 0 to 15%
Increment 0.5%
Accuracy Within +0.5% of actual grade during unchanging
operation.
Operating: 50 to 104 °F (10 to 40 °C)
Storage: -40 to 158 °F (-40 to 70 °C)
Operating: 15 to 95% relative
Storage: 5 to 95% relative
Current Draw Min. Branch Circuit
(Amps) Amps
20** 20
10** 10
MedTrack Rehabilitation Treadmills User Guide