Table of Contents
Advertisement
Transport, e. g. when
moving
Preparing and inserting the
transport bolts
40
Before transporting the washing machine:
– Turn off the tap.
– Reduce the water pressure in the water inlet hose
(refer to page 26).
– Drain any residual washing solution (refer to page
25).
– Disconnect the washing machine from the mains.
– Dismantle the supply and drainage hose.
– Install transportation protection devices.
Having transported the appliance and ensured proper
installation and connection, allow the "Spin Í"
programme to run through before starting the first
wash programme.
Transporting the washing machine:
Remove the 4 covers C.
■
Remove the rear cover D and prepare the transport
■
bolts.
Insert and tighten the transport bolts.
■
D
C
Advertisement
Table of Contents
