Harbor Freight Tools CEN-TECH 56349 Owner's Manual & Safety Instructions

3-in-1 portable jump pack

Hide thumbs

Table Of Contents

Quick Links

Download this manual

Owner's Manual & Safety Instructions

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

IMPORTANT: YOU MUST CHARGE COMPLETELY BEFORE FIRST USE,

AFTER EVERY JUMP START, AND EVERY 30 DAYS OR VOIDS WARRANTY.

Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2020 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Keep this manual for the safety warnings and precautions, assembly,

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

21a

Table of Contents

Summary of Contents for Harbor Freight Tools CEN-TECH 56349

Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
Page 2: Table Of Contents
Table of Contents Safety ............2 Maintenance ..........9 Specifications ..........4 Parts List and Diagram ......10 Setup ............5 Warranty ............ 12 Operation ............ 8 ® WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Page 3: Safety
Safety Warnings and Precautions General Safety Warnings Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. WARNING! TO PREVENT SERIOUS INJURY: – RISK OF EXPLOSIVE GASES. Working in vicinity of a lead-acid battery is To reduce risk of battery explosion, follow these dangerous.
Page 4: Specifications
If unreadable or missing, contact d. NEVER jump-start a frozen battery. Harbor Freight Tools for a replacement. e. Do not attempt to jump-start a vehicle with 4. The warnings, precautions, and instructions a non-rechargeable or defective battery.
Page 5: Setup
Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this manual including all text under subheadings therein before setup or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 11.
Page 6 Charging the Jump Pack WARNING! TO PREVENT SERIOUS INJURY: Always charge on a non-flammable surface. Approximate Press and hold the Battery Test Button on the front AC Charge Time of the unit to check the battery power level. Initial Charge: Up to 48 hours a.
Page 7 DC Appliance Compatibility The Jump Pack can run/charge 12VDC Note: Use this chart as a guideline only. auto, RV, marine, or other portable The actual power usage may vary based on the appliances that draw 15 amps or less. model or brand of the appliance. Check the actual The lower the amount of watts the appliance draws, wattage of your appliances and calculate the the longer the Jump Pack can...
Page 8: Operation
Operating Instructions Using the Work Light 1. To turn the Work Light on, press 3. To turn the Work Light off, press the Work Light button. the Work Light button again. 2. To turn flashing lights on, press the Work Light Button again. Jump-Starting a Vehicle Note: Read the vehicle owner’s manual pertaining WARNING! TO PREVENT SERIOUS INJURY:...
Page 9: Maintenance
Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY: Unplug the Jump Pack, turn the Power Switch off and allow Jump Pack to cool completely before performing any inspection, maintenance, or cleaning procedures. 1.
Page 10: Parts List And Diagram
Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Page 11 Assembly Diagram Item 56349 For technical questions, please call 1-888-866-5797. Page 11...
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.