Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nemo Max Planck 15000
Summary of Contents for Nemo Max Planck 15000
-
Page 3: Functional Description And Specifications
Functional Description and Specifications Intended Use The Max Planck 15000 by Nemo is a commercial diving floodlight intended for wide-angle illumination, professional underwater photography, videography, and nighttime search and rescue. The floodlight contains 20 white LEDs and 10 UV LEDs which together provide various working modes, including: ♦... -
Page 4: Technical Specifications
Technical Specifications Battery Charger Model XVE-2100100 Charging output voltage DC 16.8V - 1.0A Charging input voltage 100V-240VAC 50/60Hz 1.5A max Nemo Commercial Diving Floodlight Model LT-15KLM-100 Battery pack voltage 14.8V Li-ion Battery cell specification Li-ion 18650 cell Working voltage 12V-16.8V ♦... -
Page 5: Floodlight Safety
Floodlight Safety The Max Planck 15000 is a powerful floodlight meant for use underwater. Using the floodlight outside of the water for prolonged periods will cause the floodlight to heat up significantly. Do not keep the floodlight on for more than five minutes at a time outside of the water. -
Page 6: Getting Started With The Floodlight
Never open the battery charger. Instead, have it opened and repaired only by qualified personnel who will use original spare parts. Getting Started with the Floodlight Your Max Planck 15000 includes the following main components:... - Page 7 Charging the Batteries The Li-ion batteries are supplied partially charged, and must be charged to full capacity before using the floodlight for the first time. When the batteries are fully charged, the floodlight can run at the highest intensity for up to one hour. Caution: Use only a Li-ion battery from the original factory with the voltage listed on the nameplate of your floodlight.
-
Page 8: Inserting The Batteries Into The Floodlight
The batteries begin charging as soon as they are connected to the charger, and stop charging as soon as they are full. ⬥ A steady red light on the battery charger indicates that the battery is charging. ⬥ A steady green light on the battery charger indicates that the battery is fully charged. -
Page 9: Operating The Floodlight
Operating the Floodlight Switching the Floodlight On or Off ♦ The left button is used to turn the Floodlight On/Off and to change the light intensity levels. There are five light intensity levels. ♦ Pressing the left button for two seconds will turn the Floodlight ON. -
Page 10: Troubleshooting
Before using a Nemo Floodlight, ensure that the battery for the tool has been fully charged to 100%. Do not operate a Nemo Floodlight, when the battery of the tool is low in power. If the battery power becomes low, stop work immediately and recharge the battery. -
Page 11: Maintenance
Caution: Under no circumstances should the floodlight be opened for repairs or any other purpose by anyone other than an after-sales service technician authorized by Nemo Power Tools. Opening the floodlight invalidates the manufacturer warranty. Transporting the Floodlight The battery pack has effective protection against internal over-pressure and short-circuiting, as well as devices preventing violent rupture and dangerous reverse current flow. - Page 12 Disclaimer : Nemo Power Tools Ltd reserves the right to change the contents of this manual at any time without prior notice . Nemo Power Tools Ltd www.nemopowertools.com...