Adjusting Monitor Settings; Using The Eztouch Menu Buttons; Using The Shortcut Menu - Acer HD2201 User Manual

Adjusting monitor settings

Use the monitor controls (located on the monitor itself) and computer controls (accessible through
Windows) to adjust the display image. For more information about computer controls, see
"Changing Windows screen settings" on page

Using the EzTouch menu buttons

This monitor features an on-screen display (OSD) and EzTouch menu buttons that let you adjust
contrast, brightness, and other settings for the monitor. The monitor saves changes you make to
the settings, even if you turn off the monitor.
Your monitor has two levels of menus, and the functionality of the touch buttons depends on the
menu that is currently open:
•
•

Using the shortcut menu

To use the shortcut menu:
1
2
•
•
•
•
•
•
6
Using Your Gateway Flat-Panel Monitor
The shortcut menu lets you quickly change some of the most commonly accessed settings.
The main menu lets you precisely adjust all levels of settings.
Touch Menu on the front of your monitor. The rest of the button icons light up and the
shortcut menu opens.
To use an EzTouch menu button, lightly touch its icon. For adjusting a setting's values, you
can touch and hold touch buttons as you would conventional buttons.
Input Select
VGA mode: Auto
DVI, HDMI, and Component mode: Video Adjust
PIP On/PIP Off
Cancel
Main Menu
Touch Input Select to select an available video source.
Touch Auto (VGA mode) or
your display image to the ideal settings.
Touch PIP On to turn on Picture-in-Picture, and touch
Touch Cancel to exit the shortcut menu.
Touch Main Menu to open the main menu.
To turn off the button icons and close the menu, wait about ten seconds without touching
a button.
10.
Video Adjust (DVI, HDMI, and component modes) to adjust
PIP Off to turn it off.