Related Manuals for NETGEAR ReadyNAS RMEM04
Summary of Contents for NETGEAR ReadyNAS RMEM04
- Page 1 ReadyNAS RMEM04 Memory Module Installation Guide Models • RR3312 • RR4312 • RR4360 June 2017 202-11726-01 350 E. Plumeria Drive San Jose, CA 95134...
- Page 2 We recommend that you use only official NETGEAR support resources. Trademarks NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only. Compliance For regulatory compliance information, visit http://www.netgear.com/about/regulatory.
- Page 3 Contents Chapter 1 Install Additional Memory Chapter 2 Access the Inside of the Storage System on a ReadyNAS 3312, 4312, or 4360...
-
Page 4: Install Additional Memory
To install an RMEM04 memory module in your ReadyNAS system: Power off your ReadyNAS server. See the ReadyNAS OS 6 Rack-Mount Hardware Manual for power-off instructions for your server. Visit http://support.netgear.com/product/ReadyNAS-OS6 to download a PDF of the manual. Unplug the power cord. - Page 5 For details on accessing the inside, see Access the Inside of the Storage System on a ReadyNAS 3312, 4312, or 4360 on page 6. J3 J4 J5 J6 Locate the memory expansion slots on the system motherboard. Align the RMEM04 memory expansion module keys with the keys of a free memory expansion slot and press the module down until the tabs snap into place.
- Page 6 Access the Inside of the Storage System on a ReadyNAS 3312, 4312, or 4360 To access the inside of a ReadyNAS 3312, 4312, or 4360 storage system: If your system is mounted in a rack, grasp the two handles on either side and pull the system straight out until it locks.
- Page 7 • On a ReadyNAS 3312 or 4312 system, press the two release buttons on the top of the cover. • On a ReadyNAS 4360 system, press the two release buttons on the sides of the chassis.
- Page 8 Slide the top cover back. Lift the top cover from the chassis. You can now access the inside of the system.