Dell EMC PowerEdge E45S Series Installation And Service Manual page 13

Table 6. Rear view of the system
Item Ports, panels, or slots
1 Serial port
2 iDRAC dedicated port
3 Ethernet ports (2)
4 PCIe expansion card riser
1A (slot 2)
5 PCIe expansion card riser
2 (slot 3)
6
Power supply unit (PSU 1) N/A
7 Power supply unit (PSU
2)
8
LOM Riser Ethernet port
(2) (Optional)
9 USB 3.0 port (2)
10 VGA port
11 System status indicator
cable port
12 System identification
button
For information on the PSU configurations, see the Dell EMC PowerEdge R6515 Technical Specifications on the product
documentation page.
Icon Description
Enables you to connect a serial device to the system.
Enables you to remotely access iDRAC. For more information, see
the iDRAC User's Guide at www.dell.com/poweredgemanuals.
The Ethernet ports that are integrated on the system board
provide network connectivity. These NIC ports can also be shared
with iDRAC when iDRAC network settings is set to shared mode.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards.
For information on the PSU configurations, see the Dell EMC
PowerEdge R6515 Technical Specifications on the product
documentation page.
N/A
For information on the PSU configurations, see the Dell EMC
PowerEdge R6515 Technical Specifications on the product
documentation page.
N/A The NIC ports that are integrated on the LAN on Motherboard
(LOM) riser provide network connectivity.
These USB ports support USB 3.0.
Enables you to connect a display device to the system.
N/A Enables you to connect the status indicator cable and view system
status when the CMA is installed.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for 16 seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
● If the system stops responding during POST, press and hold
button is enabled in the iDRAC setup.
the system ID button (for more than five seconds) to enter
the BIOS progress mode.
PowerEdge R6515 system overview 13