Guest Network - TP-Link TL-WPA8730 User Manual

Chapter 3
3 9

Guest Network

I want to:
How can I
do that?
Create a separate network for my guests, providing Internet
access for them while at the same time limit the network
authorities for guests to ensure network security and privacy.
1 Connect to the powerline extender wirelessly. Visit
tplinkplc.net, and log in with the password you set for the
extender.
2 Go to
Guest Network.
3 Select the box of relative entry to limit network authorities.
If you have problems understanding these items, click the
question mark on the upper right corner to have more
information.
4 Click
Save to make the settings effective.
5 Configure the following settings.
To enable or disable the guest network function:
Click 2.4GHz or 5GHz, then enable the guest network of this
band. Deselect the box to disable the guest network function. If
disabled, all guest network settings of the corresponding band
will be ineffective.
To change the guest network name (SSID) and password:
The default SSID is TP-LINK_GUEST_XXXX for 2.4GHz guest
network and TP-LINK_GUEST_XXXX_5G for 5GHz guest network,
Configuring via Web Management Interface
http://
25