Table of Contents
Advertisement
8 Return ID display
Displays the return ID of the current return output number.
The ID (character string) set in [MAIN MENU] → [RETURN SETTING] → [RETURN1 ID] to [RETURN4 ID] is displayed.
The following return IDs (character strings) are set in factory settings.
• • [RET1] (When [RETURN1] is output)
• • [RET2] (When [RETURN2] is output)
• • [RET3] (When [RETURN3] is output)
• • [RET4] (When [RETURN4] is output)
9 Monitor output signal display
Indicates the signal type that is output to the monitor screen.
Configures the signal settings from [MAIN MENU] → [IN/OUT SELECT] → [VF OUT].
• • [R]
• • [G]
• • [B]
• • [Y/C]
• • [NAM]
10 High-sensitivity mode display
Displayed when [MAIN MENU] → [SYSTEM MODE] → [SHOOTING MODE] → [HIGH SENS] is set.
11 Voltage display
Indicates the voltage coming in from the power supply.
12 Focus assist magnification display
The focus assist magnification display function is displayed while active.
13 ND filter display
Indicates the selected ND filter value.
• • [1]
• • [2]
• • [3]
• • [4]
14 <WHITE BAL> switch position display
Indicates the selected switch position.
• • [A]: When the <WHITE BAL> switch is set to <A>
• • [B]: When the <WHITE BAL> switch is set to <B>
• • [P]: When the <WHITE BAL> switch is set to <PRST>
15 Color temperature display
Indicates the color temperature that is set on the camera.
This can be either the memory value when automatic white balance is performed or the value configured in the menu.
16 Shutter speed display
Indicates the shutter speed in accordance with each setting.
Refer to [MAIN MENU] → [SWITCH MODE] → [SHUTTER SPEED] for details about setting values.
17 Master gain display
Indicates the value set in [MAIN MENU] → [SWITCH MODE] → [GAIN SETTING] → [LOW GAIN]/[MID GAIN]/[HIGH GAIN].
• • [−6dB] to [36dB]
18 Offset gain display
Indicates the value set in [MAIN MENU] → [SWITCH MODE] → [GAIN SETTING] → [OFFSET LOW GAIN]/[OFFSET MID GAIN]/[OFFSET HIGH
GAIN].
• • [−2.9dB] to [+2.9dB]
19 Dynamic range stretcher display
Displayed when the dynamic range stretcher function is active.
20 Chromatic aberration compensation display
Displayed when the chromatic aberration compensation function is active.
21 Digital extender display
Displayed when the digital extender is being used.
22 Lens extender display
Displayed when the lens extender is being used.
23 Iris display
Indicates the iris setting value (F value) or [OPEN]/[CLOSE]. The F value is an approximate value.
[NC] is displayed when the lens cable is not connected.
24 F drop display
Displayed when the F drop has occurred.
NOTE
• • The display may not be supported depending on the lens model.
For details, consult the lens manufacturer.
25 Zoom position display
Indicates the zoom position.
• • [Z00] to [Z99]
NOTE
• • The zoom position is displayed when using a lens having a zoom position output.
Chapter 3 Preparation — On-screen displays of the viewfinder
– 29 –
Advertisement
Table of Contents
