Advertisement
Quick Links
STIHL FC 90
{
Instruction Manual
Manual de instrucciones
WARNING
Read Instruction Manual
thoroughly before use and follow
all safety precautions – improper
use can cause serious or fatal
injury.
ADVERTENCIA
Antes de usar la máquina lea y siga
todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto
puede causar lesiones graves o
mortales.
Advertisement
Related Manuals for Stihl FC 90
Summary of Contents for Stihl FC 90
- Page 1 STIHL FC 90 Instruction Manual Manual de instrucciones WARNING Read Instruction Manual thoroughly before use and follow all safety precautions – improper use can cause serious or fatal injury. ADVERTENCIA Antes de usar la máquina lea y siga todas las precauciones de seguridad dadas en el manual de instrucciones –...
- Page 2 Instruction Manual 1 - 38 Manual de instrucciones 39 - 81...
- Page 3 Safety Precautions and Working Emissions Control Warranty To receive maximum performance and Techniques Statement satisfaction from your STIHL edger, it is Using the Unit important that you read, understand and Trademarks Mounting the Loop Handle follow the safety precautions and the...
- Page 4 STIHL dealer or the STIHL illustration. Example: Fuel tank for gasoline distributor for your area for assistance. Loosen the screw (1).
- Page 5 Minors should never be allowed to use attachments that are specifically might be aggravated by strenuous work, this power tool. Bystanders, especially authorized by STIHL for use on your FC check with your doctor before operating children, and animals should not be model.
- Page 6 WARNING operate your power tool All factors which contribute to unless wearing goggles The ignition system of the STIHL unit whitefinger disease are not known, but or properly fitted protec- produces an electromagnetic field of a cold weather, smoking and diseases or tive glasses with very low intensity.
- Page 7 English use with the specific STIHL model are Always wear heavy duty WARNING authorized. Although certain work gloves (e.g. made of unauthorized attachments are useable leather or other wear Always shut off the engine and make with STIHL power tools, their use may,...
- Page 8 To do this with this STIHL cap, raise the allow any pressure build-up in the tank grip on the top of the cap until it is upright to release slowly.
- Page 9 Do not start the engine if there unit and take it to your authorized tact and thrown are leaks or damage – risk of fire! Have STIHL dealer for repair. objects, make sure the machine repaired by a servicing your unit is Screw Cap dealer before using it.
- Page 10 If you cannot set the correct idle speed, With the engine running only at idle, hand. Loss of control of have your STIHL dealer check your attach the power tool to the spring hook the power tool resulting in power tool and make proper...
- Page 11 / illness WARNING from inhaling toxic fumes, never run the machine Do not operate your power tool using the indoors or in poorly venti- starting throttle lock, as you do not have lated locations. control of the engine speed. FC 90...
- Page 12 If the blade continues to attachment has stopped before loosen, see your STIHL dealer. Never cleaning. Grass, weeds, etc. should be use an edger with a loose cutting cleaned off the blade at regular intervals.
- Page 13 STIHL may deny Your muffler is furnished with a spark ventional mufflers when coverage. arresting screen designed to reduce the...
- Page 14 The owner/operator of this product is responsible for properly maintaining the Remove all obstacles and objects from spark arrester. Other states or the working area. governmental entities/agencies, such as the U.S. Forest Service, may have similar requirements. Contact your local FC 90...
- Page 15 The deflector has been set by the manufacturer so that the arrow on the deflector and the open side point away from the operator. This ensures that cuttings and other debris will be directed away from the machine and operator. FC 90...
- Page 16 Place the clamp (3) against the ground drive tube and push it into the loop handle. Always walk forwards when cutting, do not pull the unit towards you Cut at a steady pace – this avoids having to make several passes FC 90...
- Page 17 Your new power tool comes with the the application by changing loop handle mounted on the drive tube, distance (A). but it must be turned and lined up to suit your requirements. Recommendation: distance (A): about 6 in (15 cm) FC 90...
- Page 18 If the cup spring (10) on the nut (6) (4) until the shaft is blocked. becomes fatigued, then the nut must be replaced! Fit Allen wrench (5) onto nut (6). FC 90...
- Page 19 Use STIHL HP Ultra oil or ask your dealer for an equivalent high quality oil The chemical composition of the fuel is to ensure the maximum performance of also important.
- Page 20 Gasoline Oil (STIHL 50:1 or equiva- lent high-quality oils) Before fueling, clean the filler cap Threaded filler cap and the area around it to ensure that...