Onboard Device - Acer Veriton 3600G Service Manual

Parameter
IDE Primary Master UltraDMA
IDE Primary Salve UltraDMA
IDE Secondary Master UltraDMA
Secondary Slave UltraDMA
SATA Mode
On-Chip Serial ATA
Serial ATA Port 0/1 Mode

Onboard Device

Press [Enter] to enter the sub-menu and the following screen appears:
Parameter
USB Controller
USB 2.0 Controller
USB Keyboard Support
Chapter 2
Description
Ultra DMA/33 implementation is possible only if
your IDE hard drive supports it and the operating
environment includes a DMA driver. If your hard
drive and your system software both support
Ultra DMA/33, Ultra DMA/66 and Ultra DMA/100
select Auto to enable BIOS support.
Select SATA Mode
This setting is used to specify the SATA
controller.
If [Legacy Mode] is selected, PATA and SATA
will be combined.
If [Native Mode] is selected, PATA and SATA
will both be enabled.
If [Auto] is selected, PATA and SATA will be
arranged by BIOS, and you will be able to see
the IDE Device status listed in Standard COMS
Features.
Select a compatible mode for Port 1 and Port 2
from Award setting to the chipset settings:
Primary Master: Compatible Mode with Serial
ATA Port 1 set to Primary Master.
Primary Slave: Compatible Mode with Serial
ATA Port 1 set to Primary Slave.
Secondary Master: Compatible Mode with
Serial ATA Port 1 set to Secondary Master.
Secondary Slave: Compatible Mode with Serial
ATA Port 1 set to Secondary Slave.
Primary Master: Compatible Mode with only
Serial ATA Enabled and Port 1 set to Primary
Master.
Secondary Master: Compatible Mode with only
Serial ATA Enabled and Port 1 set to Secondary
Master.
SATA0 Master: Enhance Mode with Port 1 set to
Native Mode Master.
SATA1 Master: Enhance Mode with Port 2 set to
Native Mode Master.
Description
This setting is used to enable/disable the
onboard USB controller.
Set to Enabled if you need to use any USB 2.0
device in the operating system that does not
support or have any USB 2.0 driver installed,
such as DOS.
This item allows the BIOS to interact with a USB
keyboard or mouse to work with MS-DOS based
utilities and non-Windows modes.
Options
Auto
Disables
IDE, RAID
Disable, Auto, Legacy Mode,
Native Mode
Primary Master
Primary Slave
Secondary Master
Secondary Slave
Primary Master
Secondary Master
SATA0 Master
SATA1 Master
Options
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
46