Zenoah BCZ260L Operator's Manual page 16

blades. Cracks can also occur if you use the blade
with blunt teeth. Replace the blade if it is damaged.
• Examine the support flange for cracks. Replace the
support flange if it is damaged.
• Make sure that the locking force on the locknut is not
decreased. The nut lock must have a locking force at
a minimum of 1.5 Nm. The tightening torque of the
locknut must be between 35-50 Nm.
• Examine the blade guard for damages or cracks.
Replace the blade guard if it has been hit or if it has
cracks.
• Examine the trimmer head and cutting attachment
guard for damages or cracks. Replace the trimmer
16
head and cutting attachment guard if they have been
hit or if they have cracks.
To prepare the product for start (BCZ260L,
EXZ260L, BCZ300L)
1. Press the primer bulb repeatedly until the fuel begins
to fill the bulb.
Note: The bulb does not need to be filled completely.
353 - 003 - 06.01.2018