7
Troubleshooting
Drying operation takes too long.
•
Fibre filter pores might be clogged. >>> Wash the filter with warm water.
•
Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the
filter drawer. (for the products with a heat pump)
•
The condenser might be blocked. >>> Wash the condenser.(for the products with a
condenser )
•
The ventilation grills in front of the machine may be closed. >>> Remove any objects in
front of the ventilation grills that blocks air.
•
Ventilation may be inadequate because the area the machine is installed in is too small.
>>> Open the door or windows to prevent the room temperature from rising very high.
•
A lime layer may have accumulated on the humidity sensor. >>> Clean the humidity
sensor.
•
Excessive amount of laundry might be loaded. >>> Do not load the drying machine
excessively.
•
Laundry might not have been wrung adequately. >>> Perform a higher speed wringing
on the washing machine.
Clothes come out damp after drying.
•
A program not suitable for the laundry type may have been used.>>> Check the
maintenance labels on the clothes and select a program suitable for the clothes' type or
use time programs as extra.
•
Fibre filter pores might be clogged. >>> Wash the filter with warm water.
•
The condenser might be blocked. >>> Wash the condenser. (for the products with a
condenser)
•
Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the
filter drawer.(For the products with a heat pump)
•
Excessive amount of laundry might be loaded. >>> Do not load the drying machine
excessively.
•
Laundry might not have been wrung adequately. >>> Perform a higher speed wringing
on the washing machine.
Drying machine does not turn on or program cannot be started. Drying machine does not
run after it is configured.
•
Power plug might be unplugged. >>> Make sure the power cord is plugged in.
•
Loading door might be open. >>> Ensure that the loading door is properly closed.
•
A program might not be set or Start/Stand-by button might not be pressed. >>> Check
that the program is set and it is not in Stand-by position.
•
Child lock may be activated. >>> Turn off the child lock.
Program terminated prematurely for no reason.
•
Loading door might not be closed completely. >>> Ensure that the loading door is
properly closed.
•
There might be a power outage. >>> Press the Start/Stand-by button to start the
program.
•
Water tank may be full. >>> Empty the water tank.
Dryer / User Manual
25 / EN