Vivotek SUPREME MD8565-N User Manual page 167

s<0~(m-1)>_h 1~5, 100
264_cbr_quant
s<0~(m-1)>_h 1~100
264_cbr_qperce
nt
s<0~(m-1)>_h 20000~"capability_videoin_c<0~(n-1
264_bitrate )>_h264_maxbitrate"
s<0~(m-1)>_h framerate,imagequality
264_prioritypoli
cy
s<0~(m-1)>_h 1~"capability_videoin_c<0~(n-1)>_h
264_maxframe 264_maxframerate"
* Only valid when "ratecontrolmode"=
vbr
4/4 Set the pre-defined quality level:
1: Medium
2: Standard
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"cbr_qpercent"
* Only available when
"ratecontrolmode"= cbr.
* Only available when
"capability_smartstream_version"=2.
0
4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality
* Only valid when "ratecontrolmode"=
cbr and "quant"= 100.
* Only available when
"capability_smartstream_version"=2.
0
4/4 The target bit rate in constant bit rate
mode.
*
Only valid when "ratecontrolmode"=
cbr
4/4 Set prioritypolicy
*
Only valid when "ratecontrolmode"=
cbr
1/4 The maximum frame rates of a H264
stream at different
resolutions("capability_videoin_c<0~
(n-1)>_resolution") are recorded in
"capability_videoin_c<0~(n-1)>_h26
VIVOTEK
User's Manual - 167