Interface - Philips 226V3LSB/00 Service Manual

Output Resistance :
(CEC Signal, not supported by this model)
Input Low Voltage :
Input High Voltage :
Output Low Voltage:
Output High Voltage:
Pull-up Resistor:
Leakage Current in standby/off :
Maximum Capacitance:
4). DisplayPort ( option , refer to Quick specification table)
5). USB Hub 2.0 (option , refer to Quick specification table)
6). Audio in ( option , refer to Quick specification table)
Input signal: 1Vrms
Loudspeaker: stereo of RMS Power
Frequency range: (WAIT FOR SUPPLIER INPUT)
Headphone connection will mute speaker
7). USB PLUG (option , refer to Quick specification table)
8). HDMI audio out (headphone): (option, refer to Quick specification table)
Stereo, > 50mVrms for headphone of 32

Interface

D-Sub Cable
Length
Connector type : D-Sub male with DDC2B pin assignments.
Pin assignments:
> 2.0V
0 – 0.4V
2.5V – 3.6V
2.7KΩ±10%
< 1.8uA
Follow DisplayPort 1.1
USB port (1 upstream, 2 or 4 downstream)
USB port (1 upstream, 1 downstream), black jack color
: Please refer to M3 cable bundle summary file
Fix with monitor when packing, with transplant pin protective cover.
PIN No.
1 Red
2 Green/ SOG
3 Blue
4 Sense (GND)
5 Cable Detect (GND)
6 Red GND
7 Green GND
8 Blue GND
9 DDC +3.3V or +5V
10 Logic GND
11 Sense (GND)
12 Bi-directional data
1KΩ±20%
< 0.8V
100pF
specification.
Blue connector thumb-operated jack screws
SIGNAL
Meridian 3
79