5.
Disconnect the hard disk module from the connector by pulling on the mylar tab on the hard disk module.
6.
Remove the hard disk module.
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
7.
Remove the four screws (G) as shown.
Step
1~4
8.
Remove the hard disk drive from the bracket.
Removing the Optical Drive Module
1.
See "Removing the Battery Pack" on page 62.
70
Size (Quantity)
M3 x L4 (4)
Color
Silver
Torque
1.8 kgf-cm
Chapter 3