Compressor Specifications - U-Line 124BEV User Manual & Service Manual

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Compressor Specifications

!
DANGER
Electrocution can cause death or serious injury.
Burns from hot or cold surfaces can cause
serious injury. Take precautions when servicing
this unit.
Disconnect the power source.
Do not stand in standing water when working
around electrical appliances.
Make sure the surfaces you touch are not hot or
frozen.
Do not touch a bare circuit board unless you are
wearing an anti-static wrist strap that is
grounded to an electrical ground or grounded
water pipe.
Handle circuit boards carefully and avoid
touching components.
To measure the start winding resistance, measure across
the C and S pins.
To measure the run winding resistance, measure across
the C and R pins.
Also check S to R and you should get the sum of the run
and start windings.
To ensure the windings are not shorted, check the S and R
to ground.
OVERLOAD PROTECTOR
STARTING RELAY
RELAY COVER
Electrical Relay and Overload Protector
Refrigerant
Voltage
Frequency
Run Cap
Start Winding
Run Winding
LRA
FLA
Starting Device
Overload
* All resistance readings are ±10%
53
u-line.com
C
R
S
CAPACITOR
EMX20CLC
R600a
220 - 240 VAC
50 Hz
2μF/380 VAC
34.9 Ohm at 77°F/25°C
47.8 Ohm at 77°F/25°C
1.9 A
0.3 A
TSD
4TM110KFBYY-53
Compressor Specifications 1