Lexmark CS317 User Manual page 132

Troubleshooting
If necessary, press
Maintenance kit nearly low [80.xy]
For more information, visit the Lexmark support Web site at
support, and then report the message.
If necessary, press
Maintenance kit very low [80.xy]
You may need to replace the maintenance kit very soon. For more information, go to
http://support.lexmark.com
If necessary, press
Memory full [38]
Try one or more of the following:
•
From the printer control panel, press
•
Decrease the resolution setting.
•
Install additional printer memory.
Memory low, no Resource Save [35]
Try one or more of the following:
•
From the printer control panel, press
printing.
•
Install additional printer memory.
Network error, port [x] [54]
Try one or more of the following:
•
From the printer control panel, press
•
Unplug the router, wait for 30 seconds, and then plug it back again.
•
Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
•
Update the network firmware in the printer or the print server. For more information, visit the Lexmark
Web site at http://support.lexmark.com.
on the printer control panel to clear the message and continue printing.
on the printer control panel to clear the message and continue printing.
or contact customer support.
on the printer control panel to clear the message and continue printing.
http://support.lexmark.com
to clear the message.
to disable Resource Save, clear the message, and continue
to clear the message and continue printing.
132
or contact customer