Lenovo ThinkPad A485 User Manual page 127

11. Gently pull the M.2 solid-state drive out of the slot.
To install the new M.2 solid-state drive in the internal-storage-drive bay, do the following:
1. Align the notch of the new M.2 solid-state drive with the slot key in the M.2 slot. Insert the solid-state
drive into the M.2 slot at an angle of about 20 degrees until it is secured tightly
downward 2 .
2. Install the screw to secure the M.2 solid-state drive.
1 and then pivot it
.
Chapter 9 Replacing devices
109