Parts, Tools, Materials - LG PRIVILEGE LMV-1920DW Installation Instructions Manual

THE FOLLOWING PARTS ARE SUPPLIED WITH THE OVEN:
NOTE: Depending on your ventilation requirements, you may not use all of these parts.
Damper/duct connector
(for roof-venting or wall-venting installation)
Not Actual Size
Two tapping screws
(for attaching the damper duct connector)
Four 1/4" x 2" lag screws
(for wall stud holes)
Two 1/4" x 2" bolts
(for securing to the upper cabinet)
Two washers
- Actual Size
(for the two upper cabinet bolts)
NOTE: You need to install at least one lag screw into a 2" x 4" stud and four anchor bolts into the wall.
The mounting area must meet the 150 lbs. weight requirement.

PARTS, TOOLS, MATERIALS

- Actual Size
One power cord clamp bushing
(for the cord hole in a metal upper cabinet)
- Actual Size
- Actual Size
One power cord clamp and
One dark-colored mounting screw
(to hold the power cord)
Actual Size
One lock pin and one washer
- Actual Size
Four 1/4" x 3" toggle bolts
(for drywall holes)
Four spring toggle heads
(for the toggle bolts)
— 5 —
-Not Actual size
- Actual Size
- Actual Size