[ VIII Disassembly Procedure ]
9. Float Switch
Exercise caution when removing heavy parts.
1. Remove the drain pan according to the procedure in section
3.
2. Removing the air-vent pipe
(1) Remove the air-vent pipe (a) from the cable strap (b).
3. Removing the drain pump
(1) Remove the four screws that are holding the drain pump and
the float switch in place.
4. Removing the float switch
(1) Remove the two screws that are holding the float switch in
place.
HWE1209A
Fig.20
Fig.21
Fig.22
- 27 -
(b)
(a)
GB