Basic Operations - Panasonic CZ-RTC5 Operating Instructions Manual

Basic Operations

1 Start operation.
Press
(The operation indicator illuminates.)
To change the setting
(P.10)
To turn the energy saving
operation ON/OFF
Press during operation.
(Only for models equipped with the
energy saving function.)
To stop
(The operation indicator turns off.)
2 Select the item to set.
Press
3 Change the setting.
Press
Note
Operation modes that cannot be set are not displayed.
The ß ap display differs from the actual ß ap angle.
Pressing
the contents before mains power failure has occurred.
If no operation is performed for a certain period of time, the backlight turns off to
save electricity. (Press any button for illumination.)
The energy saving operation restricts the maximum current value, resulting in
decreased cooling/heating performance.
(If the current of outdoor units does not reach the peak due to low load operation,
the current value is not restricted.)
The temperature range that can be set varies depending on the model.
The set temperature range can be changed using the remote controller. (P.26)
Some models do not display the ß ap.
8
(EN)
.
.
.
(The cursor disappears.)
after recovery from mains power failure will resume operation with
Operation indicator
Energy saving operation
is in process.