COMFORT SDN S.A., con domicilio social en Av. Bicentenario N° 459, Merlo, Buenos COMFORT SDN S.A., with registered office at Av. Bicentenario N ° 459, Merlo, Aires, Argentina, como fabricante de equipos enfriadores evaporativos para Buenos Aires, Argentina, as a manufacturer of Neil brand evaporative cooling vehículos marca Neil. equipment for vehicles.
USER MANUAL - PREMIUM 700 UPDATED DIGITAL CONTENT Visit our website and find all the updated information about the installation and maintenance of your Neil Evaporative Cooler. https:/ /neil.com.ar/en/technical-support/ You can find tutorial Download the last ver- Access the maintenance...
USER MANUAL - PREMIUM 700 WARRANTY COMFORT SDN S.A., guarantees the devices in case of verified faulty materials or manufacture of our Evaporative Coolers COMFORT SDN S.A., will repair or replace based on its own technical criteria, the faulty components or parts.
USER MANUAL - PREMIUM 700 TECHNICAL INFORMATION 4 AMPS Maximum power consumption using 24 volts 7 AMPS Maximum power consumption using 12 volts 700 m3/h Maximum air ow 1000 to 6000 BTU/h Approx. Refrigeration capacity 95 x 72 x 23 cm - 18Kg...
USER MANUAL - PREMIUM 700 INSTALLATION SEQUENCE PREPARING THE VEHICLE ROOF You can find tutorial videos about how to correctly cut the roof and also download the “roof cutting template” in the following link: https:/ /neil.com.ar/en/installation-tutorials/ ROOFS WITHOUT SUNROOFS: When a choice is possible on where to perforate the roof, it is recommended to do it on the driver seat line, as air distribution is optimal here.
Page 8
ADJUST THE DEVICE TO THE ROOF You can find tutorial videos about how to correctly adjust the Neil Evaporative Cooler in the following link: https:/ /neil.com.ar/en/installation-tutorials/ Set the device in the hole, center it and adjust the telescopic support bars as shown...
Page 9
USER MANUAL - PREMIUM 700 Front of the vehicle Frente del vehículo Weatherstrip Screws Telescopic support bars Washer, nut and locknut The 4 screws must be adjusted in a cross way and must be even, until making sure the weatherstrip starts being pressed against Control panel the base preventing water and air from entering.
Page 10
WATER TANK SETUP 9 mm diameter holes The Neil water tank is held with 3 M6 screws, in case of needing to perforate the sheet metal to set them, M6 rivet nuts are included in the installation kit. FLAT WASHER...
USER MANUAL - PREMIUM 700 PREVENTIVE MAINTENANCE Detailed information about your Evaporative Cooler maintenance can be found in the following link: https:/ /neil.com.ar/en/maintenance/ Every 300 hours of use (3 months) it is recommended to do the following mainte- nance procedure: 1- Remove the white cover, taking out screws on the sides.
USER MANUAL - PREMIUM 700 ¿WHAT TO DO WHEN THE NEIL EVAPORATIVE COOLER LOWERS ITS PERFORMANCE? Detailed information about how to fix performance problems of the Evaporative Cooler can be found in the following link: https:/ /neil.com.ar/en/maintenance/ Basic components and operation Check-List ELECTRONIC BOARD Make sure that the pre-cooling button “10”...
Page 13
How much does an Evaporative Cooler cool? Is it more productive if I put ice in the water? The performance of an Evaporative Cooler In the case of the NEIL Evaporative Cooler, depends on the ambient temperature and the thanks to its pre-cooling system (patented), relative humidity.
The following placements are shown as merely guidance for the ideal position in your vehicle. It will depend on its use and the load distribution. Suggested placement for the water tank EXTERNAL DIMENSIONS OF THE PREMIUM 700 MODEL ROOF CUTTING MEASURING...
USER MANUAL - PREMIUM 700 PREMIUM MICROPROCESSOR An explanatory video about how to use the controller and its features can be found in the following link: https:/ /neil.com.ar/en/quick-start-guide/ 1 - ALPHANUMERIC DISPLAY 2 - FAN SPEED UP 3 - FAN SPEED DOWN...
Page 16
USER MANUAL - PREMIUM 700 TIMER The 4 digits always show the current TIME, except when an ALARM CLOCK or the SOUND are being programmed. The illuminated icons show that the feature is activated. Pressing the button 6, the ALARM CLOCK icon is illuminated and the digits indicate the programmed time for that item.
Page 17
USER MANUAL - PREMIUM 700 DIRECT MOISTURIZER SYSTEM SETTING From the 2018 models onwards the direct moisturizer program is activated automatically. If by any reason the pre-cooling chamber sensors stop working, it is possible to program the device to work directly until the technical service can check it. It can be activated by following this steps: With the device turned on, press the button 10 for eight seconds, it will start to slowly blink.