Acer Aspire 5542 Service Manual page 60

NOTE: When attaching the antenna back to the WLAN board, make sure the cable are arranged properly.
9. Disconnect the blue antenna cable from the auxiliary connector and disconnect the yellow antenna cable
from the main connector on the WLAN board (for 3G model).
NOTE: For non-3G WLAN board module with 3 antenna cables connected to the WLAN board module. The
black antenna cable is connected to the connector #1, the White antenna cable is connected to
connector #2 and the Gray antenna cable is connected to connector #3.
NOTE: For non-3G WLAN board module with 2 antenna cables connected to the WLAN board module. The
Black antenna cable is connected to the connector J2 and the Gray antenna cable is connected to
connector J3.
52 Chapter 3