Panasonic WV-X6531NRF Important Information Manual page 22

Connecting to a network using a PoE+ hub when the temperature is –30 °C
{–22 °F} or less
* When the temperature is –30 °C {–22 °F} or less, use a 24 V AC power supply or a tested PoE
injector
X6531
<Required cable> Ethernet cable (category 5e or better, straight)
Powered
speaker
Confirmation monitor
*
Plug-in power type
microphone
Powered
speaker
Plug-in power type
microphone
IMPORTANT:
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
• If a PoE+ hub is not used, each network camera must be connected to a 24 V AC power
supply.
• When using 24 V AC, power supply from a PoE+ hub or router is not required.
.
X6511
RJ45 waterproof connector
Confirmation monitor
*
RJ45 waterproof connector
Hub, router
Ethernet cable
(category 5e or
better, straight)
➡ 24 V AC
power supply
Ethernet cable
(category 5e or better, straight)
* The audio output can be switched to the monitor
output. When using the monitor output, audio
output is not available.
22
Ethernet cable
(category 5e or better, straight)
PC
Tested PoE injector
X6531 X6511