Acer Aspire 5040 Service Manual page 40

Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
Info.
Infrared Port (FIR)
Legacy USB Support:
F1 Help
← →
Esc Exit
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
.
Parameter
Infrared Port
Base I/O address
Interrupt
DMA channel
Serial Port A
34
PhoenixBIOS Setup Utility
Main Advanced
[Enabled]
[Enabled]
Select Item
↑ ↓
Select Menu
Enables, disables or auto detects the infrared port.
Sets the I/O address of the infrared port.
Sets the interrupt request of the infrared port.
Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP.
Enables. disables or auto detects the serial port A.
Security
F5/F6 Change Values
Enter Select Sub-Menu
Description
Boot Exit
Item Specific Help
Configure Infrared Port
using options:
[Disable]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when controlled
by OS
F9 Setup Defaults
F10 Save and Exit
Options
Disabled
/Disabled/Auto
2F8
/278
IRQ3
/IRQ5
DMA3
/DMA1
Enabled
/Disabled/Auto
Chapter 2