Sharp SMC2242DS Operation Manual page 7

I N S T A L L A T I O N G U I D E
8. Choosing a Location for Your Oven
You will use your oven frequently so plan its location for ease of use. Your microwave oven can be built into a
cabinet or wall by itself or above any electric wall oven or warming drawer using Sharp's Built-in Kits listed below.
Please note: It cannot be built in above any gas wall oven.
Trim Kit #
RK56S27
RK56S30
See Sketch-1 for proper location when building in above an electric wall oven or a warming drawer. Carefully
follow both the electric wall oven/warming drawer installation instructions and Sharp's Built-in Kit instructions. Be
sure that the clearance of the floor between the electric wall oven/warming drawer and the microwave oven is a
minimum of 1-1/2 inches.
Description
SMC2242DS Trim Kit, 27" Stainless Steel
SMC2242DS Trim Kit, 30" Stainless Steel
MIN.
1½"
MIN.
36"
MICROWAVE CUTOUT
ELECTRIC WALL
OVEN/WARMING
DRAWER CUTOUT
Sketch-1
7